Effortless Shower Handle Removal: A Step-by-Step Guide

How to Remove Shower Handle


In this comprehensive guide, we will show you how to remove a shower handle without using screws. Whether you’re remodelling a bathroom or replacing a faulty handle. Our step-by-step instructions will help a lot to remove a shower handle. Say goodbye to the pain of fumbling with obstinate screws and hello to a simple handle removal procedure.

Step 1: Gather the Necessary Tools

Assemble the following tools before beginning the removal of the shower handle:

  • A flexible wrench
  • Flathead screwdriver
  • Allen key, if necessary.
  • Pliers, if required.

The removal process will go smoothly and effectively if these tools are accessible.

Step 2: Determine the Type of Handle

There are many different styles of shower handles, and each type may require a different technique for removal. Knob handles, lever handles, and handle sets are examples of common types. Use the proper removal technique. Also, determine the precise type of handle you have.

Step 3: Inspect the Handle

Closely inspect the handle. And see if any screws are visible. In certain circumstances, decorative caps or trim pieces may be placed over screws to hide them. Check the screws that need to be removed before moving to the next step. Use a screwdriver to do so. Continue to Step 4 ifyour handle does not have any screws that are visible.

Step 4: Look for Set Screws

There may be set screws securing handles that are hidden from view. Check the handle base for small holes or indentations. Usually, an Allen wrench can be used to loosen these set screws. To loosen the set screw, place the correct size Allen wrench in the opening and turn it counterclockwise.

Step 5: Apply Pressure and Twist

After the set screws have been loosened or removed, remove the handle from the valve stem. Grip the handle firmly and apply gentle pressure while twisting it counterclockwise. The handle should gradually loosen and fall off.

Step 6: Remove Trim Pieces (If Applicable)

Shower handles occasionally come with extra trim pieces like escutcheons or decorative plates. Hand or flathead screwdriver removal works for these pieces. Once taken out, store them for potential reinstallation.

Step 7: Disconnect the Valve Stem

You might need to unplug the valve stem in order to completely remove the handle assembly after removing the handle and any trim pieces. Consult the manufacturer’s instructions or a licensed plumber If you’re unsure about this step. It’s crucial to follow the right steps to prevent harming the valve or plumbing system.

Step 8: Reinstallation or Replacement

If you want to reinstall the handle, do so in the opposite order to ensure a secure and snug fit. Replace the handle at a hardware store or the manufacturer to match your shower system’s specifications.


Although removing a shower handle without screws might initially seem difficult. With the right equipment and knowledge, it becomes a simple procedure. You can easily remove the handle and carry out your bathroom maintenance or renovation tasks by carefully following our step-by-step instructions. Enjoy the satisfaction of a working shower handle and a bathroom fixture that works well.

Leave a Reply

Your email address will not be published. Required fields are marked *